AnyTimeInterrogationRequestResult

Introduction

The N-Squared ASN.1 codec for the MAP AnyTimeInterrogationRequestResult operation supports the following argument attributes for encode/decode.

This operation does not support any variants. This structure is the only codec option available.

Field Type Description
<anon> Object SEQUENCE, UNIVERSAL 16, IMPLICIT, Tag Byte = 30
This element is a sequence which contains one or more of the following elements.
[Required]: This element is required to be present.
.subscriberInfo Object SEQUENCE, UNIVERSAL 16, IMPLICIT, Tag Byte = 30
This element is a sequence which contains one or more of the following elements.
[Required]: This element is required to be present whenever the containing element is present.
.locationInformation Object SEQUENCE, CONTEXT 0, IMPLICIT, Tag Byte = a0
This element is a sequence which contains one or more of the following elements.
.ageOfLocationInformation 0 - 32767 INTEGER, UNIVERSAL 2, IMPLICIT, Tag Byte = 02
The value is an integer within the indicated range.
.geographicalInformation Binary String OCTET STRING, CONTEXT 0, EXPLICIT, Tag Byte = a0
The value is the raw encoded bytes for this element.
.vlr-number Binary String OCTET STRING, CONTEXT 1, IMPLICIT, Tag Byte = 81
The value is the raw encoded bytes for this element.
This field has sub-encoding as per AddressString in ETSI TS 100 974.
.vlr-number_digits [0-9abcABC*#]+ Digits. Alternate encode source.
For encoding, either [a-c] and [A-C] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.vlr-number_noa 0 - 7 Nature of Address Indicator. Relevant for encode iff vlr-number_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 0
.vlr-number_npi 0 - 15 Numbering Plan Indicator. Relevant for encode iff vlr-number_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (ITU-T E.164)
.locationNumber Binary String OCTET STRING, CONTEXT 2, IMPLICIT, Tag Byte = 82
The value is the raw encoded bytes for this element.
This field has sub-encoding as per ISUP Location Number Address in Q.763, Figure 30.
.locationNumber_digits [0-9a-fA-F]+ Digits. Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.locationNumber_noa 0 - 127 Nature of Address Indicator. Relevant for encode iff locationNumber_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 2 (Unknown)
.locationNumber_inn 0 - 1 Internal Network Number Indicator. Relevant for encode iff locationNumber_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (Not Allowed)
.locationNumber_npi 0 - 7 Numbering Plan Indicator. Relevant for encode iff locationNumber_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (ITU-T E.164)
.locationNumber_pri 0 - 3 Presentation Restricted Indicator. Relevant for encode iff locationNumber_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (Restricted)
.locationNumber_si 0 - 3 Screening Indicator. Relevant for encode iff locationNumber_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 3 (Network Provided)
.cellGlobalIdOrServiceAreaIdOrLAI Object CHOICE, CONTEXT 3, Tag Byte = a3
This element is a choice. Specify at most one of the following options.
.cellGlobalIdOrServiceAreaIdFixedLength Binary String OCTET STRING, CONTEXT 0, IMPLICIT, Tag Byte = 80
The value is the raw encoded bytes for this element.
This field has sub-encoding as per INAP CGID or SAID Fixed Length in 3GPP TS 03.18, Figure 3.
This element is one of the possible alternatives for the containing CHOICE.
.cellGlobalIdOrServiceAreaIdFixedLength_hex [0-9a-fA-F]{14} Hex String. Alternate encode source.
The hex string value must always consist of exactly 14 characters (7 bytes).
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.cellGlobalIdOrServiceAreaIdFixedLength_mcc [0-9a-fA-F]{0,4} Mobile Country Code (hex digits). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value will be left-padded with 0 up to four digits.
Will always be set (using lower-case) on decode when source field is present
. [Encode Default]: 0000
.cellGlobalIdOrServiceAreaIdFixedLength_mnc [0-9a-fA-F]{3} Mobile Network Code (hex digits). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value must be exactly three digits if specified.
Will always be set on decode when source field is present.
[Encode Default]: 000
.cellGlobalIdOrServiceAreaIdFixedLength_lac [0-9a-fA-F]{1,4} Location Area Code (hex digits as per 3GPP TS 24.008). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value will be left-padded with 0 up to four digits.
Encode value must be at least one digit and at most four digits if specified.
Will always be set (using lower-case) on decode when source field is present.
[Encode Default]: 0000
.cellGlobalIdOrServiceAreaIdFixedLength_ci_sac [0-9a-fA-F]{1,4} Cell Identity or Service Area Code (hex digits as per 3GPP TS 23.003). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value will be left-padded with 0 up to four digits.
Encode value must be at least one digit and at most four digits if specified.
Will always be set (using lower-case) on decode when source field is present.
[Encode Default]: 0000
.laiFixedLength Binary String OCTET STRING, CONTEXT 1, IMPLICIT, Tag Byte = 81
The value is the raw encoded bytes for this element.
This field has sub-encoding as per INAP LAI Fixed Length in 3GPP TS 23.003, Figure 17.
This element is one of the possible alternatives for the containing CHOICE.
.laiFixedLength_hex [0-9a-fA-F]{10} Hex String. Alternate encode source.
The hex string value must always consist of exactly 10 characters (5 bytes).
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.laiFixedLength_mcc [0-9a-fA-F]{0,4} Mobile Country Code (hex digits). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value will be left-padded with 0 up to four digits.
Will always be set (using lower-case) on decode when source field is present
. [Encode Default]: 0000
.laiFixedLength_mnc [0-9a-fA-F]{3} Mobile Network Code (hex digits). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value must be exactly three digits if specified.
Will always be set on decode when source field is present.
[Encode Default]: 000
.laiFixedLength_lac [0-9a-fA-F]{1,4} Location Area Code (hex digits as per 3GPP TS 24.008). Alternate encode source.
For encoding, either [a-f] and [A-F] (upper-case or lower-case) may be used.
Encode value will be left-padded with 0 up to four digits.
Encode value must be at least one digit and at most four digits if specified.
Will always be set (using lower-case) on decode when source field is present.
[Encode Default]: 0000
.selectedLSA-Id Binary String OCTET STRING, CONTEXT 5, IMPLICIT, Tag Byte = 85
The value is the raw encoded bytes for this element.
.msc-Number Binary String OCTET STRING, CONTEXT 6, IMPLICIT, Tag Byte = 86
The value is the raw encoded bytes for this element.
This field has sub-encoding as per AddressString in ETSI TS 100 974.
.msc-Number_digits [0-9abcABC*#]+ Digits. Alternate encode source.
For encoding, either [a-c] and [A-C] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.msc-Number_noa 0 - 7 Nature of Address Indicator. Relevant for encode iff msc-Number_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 0
.msc-Number_npi 0 - 15 Numbering Plan Indicator. Relevant for encode iff msc-Number_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (ITU-T E.164)
.geodeticInformation Binary String OCTET STRING, CONTEXT 7, IMPLICIT, Tag Byte = 87
The value is the raw encoded bytes for this element.
.currentLocationRetrieved 1 NULL, CONTEXT 8, IMPLICIT, Tag Byte = 88
The value 1 represents a NULL value which is present.
.sai-Present 1 NULL, CONTEXT 9, IMPLICIT, Tag Byte = 89
The value 1 represents a NULL value which is present.
.locationInformationEPS Object SEQUENCE, CONTEXT 10, IMPLICIT, Tag Byte = aa
This element is a sequence which contains one or more of the following elements.
.e-utranCellGlobalIdentity Binary String OCTET STRING, CONTEXT 0, IMPLICIT, Tag Byte = 80
The value is the raw encoded bytes for this element.
.trackingAreaIdentity Binary String OCTET STRING, CONTEXT 1, IMPLICIT, Tag Byte = 81
The value is the raw encoded bytes for this element.
.geographicalInformation Binary String OCTET STRING, CONTEXT 3, IMPLICIT, Tag Byte = 83
The value is the raw encoded bytes for this element.
.geodeticInformation Binary String OCTET STRING, CONTEXT 4, IMPLICIT, Tag Byte = 84
The value is the raw encoded bytes for this element.
.currentLocationRetrieved 1 NULL, CONTEXT 5, IMPLICIT, Tag Byte = 85
The value 1 represents a NULL value which is present.
.ageOfLocationInformation 0 - 32767 INTEGER, CONTEXT 6, IMPLICIT, Tag Byte = 86
The value is an integer within the indicated range.
.userCSGInformation Object SEQUENCE, CONTEXT 11, IMPLICIT, Tag Byte = ab
This element is a sequence which contains one or more of the following elements.
.csg-Id Binary String BIT STRING, CONTEXT 0, IMPLICIT, Tag Byte = 80
The value is the raw encoded bytes for this element.
[Required]: This element is required to be present whenever the containing element is present.
.accessMode Binary String OCTET STRING, CONTEXT 2, IMPLICIT, Tag Byte = 82
The value is the raw encoded bytes for this element.
.cmi Binary String OCTET STRING, CONTEXT 3, IMPLICIT, Tag Byte = 83
The value is the raw encoded bytes for this element.
.subscriberState Object CHOICE, CONTEXT 1, Tag Byte = a1
This element is a choice. Specify at most one of the following options.
.assumedIdle 1 NULL, CONTEXT 0, IMPLICIT, Tag Byte = 80
The value 1 represents a NULL value which is present.
This element is one of the possible alternatives for the containing CHOICE.
.camelBusy 1 NULL, CONTEXT 1, IMPLICIT, Tag Byte = 81
The value 1 represents a NULL value which is present.
This element is one of the possible alternatives for the containing CHOICE.
.netDetNotReachable 0 - 4294967295 ENUMERATED, UNIVERSAL 10, IMPLICIT, Tag Byte = 0a
The value is an integer within the indicated range.
This element is one of the possible alternatives for the containing CHOICE.
.notProvidedFromVLR 1 NULL, CONTEXT 2, IMPLICIT, Tag Byte = 82
The value 1 represents a NULL value which is present.
This element is one of the possible alternatives for the containing CHOICE.
.mnpInfoRes Object SEQUENCE, CONTEXT 8, IMPLICIT, Tag Byte = a8
This element is a sequence which contains one or more of the following elements.
.routeingNumber Binary String OCTET STRING, CONTEXT 0, IMPLICIT, Tag Byte = 80
The value is the raw encoded bytes for this element.
This field has sub-encoding as per TBCD-STRING in ETSI TS 100 974.
.routeingNumber_digits [0-9abcABC*#]+ Digits. Alternate encode source.
For encoding, either [a-c] and [A-C] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.imsi Binary String OCTET STRING, CONTEXT 1, IMPLICIT, Tag Byte = 81
The value is the raw encoded bytes for this element.
This field has sub-encoding as per TBCD-STRING in ETSI TS 100 974.
.imsi_digits [0-9abcABC*#]+ Digits. Alternate encode source.
For encoding, either [a-c] and [A-C] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.msisdn Binary String OCTET STRING, CONTEXT 2, IMPLICIT, Tag Byte = 82
The value is the raw encoded bytes for this element.
This field has sub-encoding as per AddressString in ETSI TS 100 974.
.msisdn_digits [0-9abcABC*#]+ Digits. Alternate encode source.
For encoding, either [a-c] and [A-C] (upper-case or lower-case) may be used.
Will always be set (using lower-case) on decode when source field is present.
.msisdn_noa 0 - 7 Nature of Address Indicator. Relevant for encode iff msisdn_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 0
.msisdn_npi 0 - 15 Numbering Plan Indicator. Relevant for encode iff msisdn_digits is used.
Will always be set on decode when source field is present.
[Encode Default]: 1 (ITU-T E.164)
.numberPortabilityStatus 0 - 4294967295 ENUMERATED, CONTEXT 3, IMPLICIT, Tag Byte = 83
The value is an integer within the indicated range.